Installing Unsigned Application at 12:48 PM

Installing Unsigned Application and ending the 'Certificate Errors'
for Nokia Symbian S60v3 phones using BiNPDA SecMan


http://mobileremix.blogspot.com/2008/08/installing-unsigned-application.html

Metallica - Death Magnetic - Lyrics at 5:29 PM

Download Link:

http://www.fileqube.com/shared/UvcuY110990


Download

Metallica 'Death Magnetic' Album Leaked at 2:11 PM

Metallica 'Happy' Despite 'Death Magnetic' Album Leak

It was sold by accident...

Metallica drummer Lars Ulrich has insited that the band are happy despite their new album leaking ahead of its official release next week.

'Death Magnetic', which is due worldwide on September 12th, emerged online after a record shop in Paris accidentally sold a copies to customers on September 2nd.

Speaking to California radio station Live 105, Ulrich said: "Listen, we're ten days from release. I mean, from here, we're golden.

“If this thing leaks all over the world today or tomorrow, happy days. Happy days. Trust me. Ten days out and it hasn't quote-unquote fallen off the truck yet? Everybody's happy.

“It's 2008 and it's part of how it is these days, so it's fine. We're happy."

Metallica have attempted to keep information about 'Death Magnetic' secret since they confirmed that the record had been completed earlier this year.

Courtesy - Jason Gregory, Gigwise.com


http://www.shmn.info/blog/?p=199

Slow DVD writing speed at 5:40 PM

The most common reason for this is your DMA is not enabled

Turn your DMA modes on in the Device Manager

• Press Window key + Pause Break (System properties)
  
• Control + Tab 3 times (Hardware Tab)
  
• Alt + D (Device Manager)
  
• Tab, type I (until IDE ATA/ATAPI controllers is selected)
  
• Right arrow to expand
  
• Type P (select Primary IDE Channel)
  
• Enter (wait until Primary IDE Channel Properties appears)
  
• Control + Tab to Advanced Settings Tab
  
• Change your Transfer Mode(s) to DMA if available (chances are, it is set to PIO only)
  
• Do that for both Device 0 and Device 1, and repeat for any other Primary IDE Channels that you have
• Click OK
• And then open the Secondary IDE Channel listing. Do the same as above
• Restart

By editing the Registry you can do it in following way -

Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Note that many CD and DVD drives only use UDMA-2, because their data rate is much lower than that of a hard disk. This is normal.